Skip to main content
Aravinda sametha review

Movie starts with sunilAravindha Sametha show started with a flash back episode of faction story in Kommaddi. Sunil takes us back to the flash back.

 First movie started with rayalasima backdrop
Hero intro started


After 10 min flight scene started which was leaked previously 

First fight and Tarak’s shirtless entry fight has enough high moments for fans, but has a high dose of violence.


Just now jadapathi babu introduced as villain 
Nagababu is a father of ntr 
It's very emotion scene with nagababu who was died at fight scene


First song is ekonalo cherinado
 In “ Ram Rudhiram “ ( pathos song ) taking , trivikram has shown his philosophical side
First twenty minutes runs on a highly emotional note. Veera Raghava’s (NTR) entry followed by a high action block and ‘Yeda Poyinado’ song

Naga Babu son, Veera (NTR) comes to his village. Twist to Naga Babu’s character.

NTR’s stylish look, Mass Story, High Octane Action, Rocking Music and super strong 

Veera Raghava Reddy decided to leave the faction and the village to calm down the faction wars



Veera Raghava meets Sunil (Neelambari) and Aravinda’s (Pooja Hegde) family. The story shifts into entertaining mode.
Tarak looks lean and fit. There is a visible difference in the way he looks on screen due to his perfectly chiselled body for Aravindha Sametha.

Second song started which is anaganaga arvimdata

Comments

Post a Comment

Popular posts from this blog

      Voting machine using Arduino We all are quite familiar with voting machines, even we have covered few other electronic voting machine projects previously aan  using RFID and AVR microcontroller. In this project, we have used the arduino controller to create an  electronic voting machine Electronic voting machine has now replaced the traditional mechanism of ballot voting due to several advantages like security, automatic counting etc. The system consists of two units – the control unit and the user unit. The control unit consists of some control switches and status LED’s, and is handled by the presiding officer. The user unit provides voting facility and contains a matrix keypad, a memory IC and an LCD display. The system operates in three modes – the Idle mode, Voting mode and Counting mode. Each mode is identified by a status byte written in the EEPROM. In Ideal mode the machine is idle, that means the machine is ready to use. When the presiding officer press the ST
5 comments
Read more
Wireless notice board using Arduino and GSM module Wireless notice board  is very selective term for this project, as it has a very wide scope rather than just being a simple notice board. First we should understand the purpose of this project, in this system we can display a message or notice to some display device like LCD, and this message can be easily set or changed from anywhere in the world, just by using the  SMS facility  of your mobile handset. Whatever notice we want to display, just send the SMS of that text, with some prefix and suffix. This is very useful in Hotels, Malls, college, offices and can be used anywhere, even at home. Like you can set the message like “Do not disturb” at your hotel’s room gate, can set message at your home’s door step when you are away, and of course it is used as notice board in schools, colleges, cinema halls etc. And yes, it’s just not a simple Message board, the usefulness of this project is that you can set or change the message or no
Post a Comment
Read more